NETGEAR Orbi RBK763S WiFi 6 Mesh System Installation Guide

Netgear Orbi RBK763S creates fast WiFi connections to your Internet service. It is a Mesh system, supports Tri-band frequency with WiFi 6 technology. The modem is connected to the Orbi router and the WiFi signal is spread around your house by the Orbi satellite. Let’s proceed and covers the Netgear Orbi setup but before that, you should know the features of router and satellite; that why this device is suitable for you.

Netgear Orbi Router and Satellite features

Orbi router and satellites works together, and forms a Mesh system.

Router Features

• Ethernet cable is used to connect the router to the home modem.
• The router’s hardware includes a power connector, 3 LAN Ports, 1 WAN Port, and buttons for syncing and resetting.
• Additionally, the gadget has a LED on the front that shows the router status. And LED at the panel shows the power status.

Satellite Features

• Satellite connects with the router using WPS button and not with wire or cable.
• The satellite’s hardware includes a power connector, 2 LAN Ports, Button for syncing and resetting.
• And in the front of a satellite, there is a LED which determines its status.

Here, we have covered the features of router and satellite of Netgear Orbi RBK763S. Now, move forward towards the Netgear Orbi RBK763S setup.

Netgear Orbi RBK763S AX5400 Setup

You can setup the Orbi by two ways; Orbi App and Web Interface. Follow these few steps, to finish the setup of your Mesh WiFi system.

Via Orbi App

You can use the Orbi app to access the Orbi Network.

• Download the Orbi App on your Smart Phone; it is available on both Play store and App store.
• After the app is downloaded, go to the WiFi settings on your Smart Phone and connect it with the Orbi router Network.
• After connecting with the network, open the Orbi app and create an account and login to it.
• To finish the setup, adhere to the directions displayed on the screen.

Via Web Interface

You can configure the Orbi with the web interface, as well.

• First, you need to connect with the Orbi router network on a device; either by WiFi or Cable.
• After that open web browser and type orbilogin.com for orbilogin page.
• Once you prompted to the page, enter the default credentials to login; for username and password, check the router’s label.
• Once you are logged in, you have to adhere to the directions displayed on your screen; to configure the router.

Here your Orbi router setup via web interface is completed, after the router; you can add the satellite.

Add Satellite of Netgear Orbi RBK763S

To add the satellite, you simply have to sync it with the router; then it will use its configuration.

• To connect satellite with the router, find the sync button.
• After finding it, press the button on router and same button on satellite within 2 minutes.
• Now, wait for the LED on satellite to turn Blue, which indicates that it is connected successfully with the router.

Conclusion

In the end, we can say that here you have learned to configure Netgear Orbi RBK763S using Orbi app and web interface; and how you can add the satellite in fewer steps.