Detailed Guide on Netgear Orbi Pro SXK80 AX6000

The Netgear Orbi Pro SXK80 AX6000 is dedicating high-speed WiFi connections to Internet service. Your modem or gateway will connect to the Orbi Pro WiFi 6 router. In order to expand the WiFi signal throughout your house, you may either utilize the router alone or allow it to connect with Orbi satellite, as it supports up to six Orbi Pro satellites.

Orbi Pro SXK80 AX6000: Router and Satellite Hardware

Here, we will know about the hardware devices, both router and Satellite.

Orbi Pro SXK80 AX6000: Router Hardware

1. LED bar

2. The Sync button also supports WPS connectivity.

3. Ethernet port  1 for 2.5G/1G, which is yellow in color.

4. Ethernet ports for 1G LANs 2–5. One LAG can be form by LAN ports 2 and 3. Another LAG may be form by LAN ports 4 and 5.

5. LED power

6. The button to Reset

7. Connector for DC Power

Orbi Pro SXK80 AX6000: Satellite Hardware

1. LED bar

2. The Sync button also supports WPS connectivity.

3. Ethernet port 1 for 2.5G/1G

4. Ethernet ports for 1G LANs 2–5. One LAG can be form by LAN ports 2 and 3. Another LAG may be form by LAN ports 4 and 5.

5. LED power

6. The button to Reset

7. Connector for DC Power

Now after knowing about the router and satellite, let’s proceed and connect the Orbi pro router to modem.

Connect Orbi Pro Router to Modem

At the back of your router, you might see one yellow port and 4 LAN ports. On the other hand, you will discover a label at the bottom of your router. On a label, your pre-set SSID and password is given.

• You need to connect your Orbi pro router with the modem.

• For that you need to first restart your modem, by pulling the plug out and after few minutes; plug it back in.

• Take Ethernet cable to connect your Orbi pro router with the modem. Just simply insert the one end of cable to the yellow WAN port of router and other end to the LAN port of modem.

• After connecting router and modem, turn on the router. To do that, just plug in the power adapter of router into working wall socket and turn on the switch.

• At the end, wait for the power LED to turn Lights green.

Here your router and modem is connected, and when the LED bar turns solid white; it means router WiFi network is ready to setup.

Login to Orbi Pro Router

• Firstly, make sure that your WiFi is enable; if not then enable it. Afterwards, go to WiFi settings on your device and connect it to Orbi Pro router’s network.

• Launch a browser and type orbilogin.com and press enter that will direct you to the Orbilogin page.

• You have to now login to the Orbilogin page just enter the default credentials. To know the default credentials, you can check on user manual.

• After logging in, you will reach to the Netgear Orbi Pro SXK80 AX6000 setup page.

•  Just follow instructions, to finish setup process.

Here, Orbi pro setup is completed; which means your router is connected to the internet.

Add Orbi Pro Satellite

You can add satellite; and for that you need to connect Orbi satellite to the router. After connecting to router; it will automatically configures from the router’s configuration.

• To connect satellite, you need to first find sync button on router and satellite.

• Press that button on router and within two minutes; press the same on satellite, as well.

• Now, wait for BLUE LED, which will indicate that your router and satellite is connected and connection between them is good.

Conclusion

In the end, we can say that Netgear Orbi Pro SXK80 AX6000 is easy to setup and has many features. It comes from one router and one satellite; you can easily connect the router with modem and sync the satellite.