Netgear Orbi Factory Reset Process and Re-Configuration

Netgear Orbi is a mesh WiFi system which has Orbi router and satellite devices in its package. The router connects with the modem and satellites connect to the router wirelessly.

It is easy to establish Orbi network in your house. But, you can also face technical problems like router is not working and satellites aren’t connected to the router.

In these kinds of the situations, you need to try Orbi factory reset process. Here, in this blog you will learn how to start the Orbi reset process.

After the reset process, you have to re-configure the Orbi mesh system with the help of the Netgear Orbi login interface.

How to Initiate Orbi factory Reset Process?

It is pretty easy to start the Orbi reset process. You just have to follow some of the easy steps which are given down here.

Orbi Router

• There is a Reset pinhole button on the back of router.
• You have to use a pen of pin to long press it.

Orbi Satellites

• In the case of the satellites, reset process is similar like router.
• Just find Reset pinhole button and give it a long press.

So these were the steps to initiate and complete factory reset Orbi process. After resetting the Orbi mesh system, you have to re-adjust the Orbi settings using your computer via orbilogin.net. Let’s see how to configure the Orbi once again after reset.

How to Re-Configure Orbi Mesh System?

The configuration can easily do with the help of your computer and correct instruction which are given below here.

1. Connect Computer

You have to link your computer first with the help of LAN cable. Then, you haveto open an updated web browser in your computer. Then, you have to access the interface with the help of login URL orbilogin.net. Search it and you will reach to the login page of the interface.

2. Access Interface

You have to enter the username and password on this login page. After the reset, the admin login credentials are deleted. So, now you have to use those credentials which you have typed in at the time of the Netgear Orbi setup.

3. Re-Adjust Settings

You will access the interface of Orbi mesh system by entering the admin credentials. Here, on this interface page, you can easily re-configure the Orbi device.

After adjusting the settings, you must check for the new firmware update by following some steps written down here.

How to Update Orbi Firmware?

• Access the interface and go to Settings.
• Scroll down and click on the Firmware tab.
• Here, you will see information about current firmware.
• Then, search for the latest firmware version.
• If the firmware is available, then download it.
• After downloading it, you have to install it, and reboot the Orbi mesh system.

So, these were the steps to update your Orbi system with the help of orbilogin.net interface which you can access via your computer.

In Conclusion

Here, we have come to the end of the blog, where you have learned how to initiate the Orbi factory reset process. After factory reset Orbimesh system, we have provided instructions to access the interface using your computer to re-configure the Orbi device. Then at the end, you have seen steps to update the Orbi firmware system.