The Netgear Orbi RBK352 Router Setup Guide

Orbi mesh systems are pretty useful devices if you want to extend the internet speed and reliability. Here, you will get to know how to the complete the new Orbi RBK352 router with the help of simple instructions, starting from here.

Orbi RBK352 Setup

There are simple steps with which you can setup the NetgearOrbiRBK352 router and connect satellites to it;

• Place the Orbi router near to the modem.
• Use the Ethernet cable and connect one end to the modem LAN port.
• Connect other end to the router WAN port.
• After that supply power to the router.

Now, you can easily connect satellites to the router via Sync button. First, connect the power to the satellites and second press the Sync button of router and satellites. After connecting all the devices, you have to configure the Orbi network which you can do through your computer as well as phone.

Orbi RBK352 Router Login

There are two methods to log in to the Orbi network interface; one is via Orbi app and other is orbilogin GUI. Let’s see how to configure it;

Via Phone/Orbi App

Download the app from Play Store or App Store > open and access the app by entering the admin credentials (given on label) > you will reach to the dashboard. here you can easily manage the Orbi settings.

Via Computer/Orbilogin.net

Connect the computer or laptop to the Orbi network> open the web browser and search Orbilogin.net or IP 192.168.1.1> you will reach to the login GUI page> enter the admin credentials and Login to interface. Here, you can manage or adjust the settings and networks.

Now, you must learn how to update RBK352 firmware and change WiFi password.

Orbi RBK352 Update and Password Change

To update the firmware, you have to access the interface via URL or IP address and inside it; you must find and open the firmware tab. here, you can update the Netgear Orbi RBK352 router.

To change the WiFi password, you must access the interface or app and click on the Wireless Networks tab. Here you can enter and save your new SSID username and password.

You can also face troubles related to the router setup which you can easily dispel by using these below written tips and solutions.

Reboot and Reset Router to Dispel Issue

You can use these most major solutions to the troubleshoot any technical issue related to Netgear Orbi RBK352 router;

Reboot

• Find the power button.
• Press it twice to restart.
• First press will turn off the device.
• Second press will turn on the device.

Reset

• Find the reset button on the router back.
• Press and hold it for 10 seconds.
• You can do it with a pen or pin.
• After resetting the device, initiate Netgear Orbi Setup again.

The Conclusion

Here, you have seen and learned about how to connect the Netgear Orbi RBK352 router in your home, and configure it with the help of two methods.