Orbi Mesh Login
Why Can’t I Factory Reset Orbi RBS850 Satellite?
Resetting the Orbi mesh system is the only thing left when no hack works to resolve a major WiFi-related problem. Just in case you can’t factory reset Orbi RBS850 satellite, this blog can help you a lot. Refer to information given below and learn the correct procedure of resetting an Orbi satellite. Apart from this, you will also get to know what to do in case you fail to complete the reset process.
How to Factory Reset Orbi RBS850 Satellite Properly?
You are supposed to factory reset your Orbi RBS850 satellite properly using the instructions given below. Just make sure that your satellite is not connected to any device (not even your WiFi router):
- Ensure that your Orbi is connected to power.
- Check the back panel of the RBS850 satellite and find the Reset button.
- Grab a sharp object like a paper clip or a pin.
- Using the chosen object, press the Reset button and hold it for at least seven seconds.
- The ring LED of your satellite will blink amber.
- Your satellite is now reset to the factory default settings.
This is how you can reset your Orbi RBS850 satellite successfully. Although the steps are written for the RBS850 satellite, they can be used to perform a factory default reset of any Orbi satellite model. Now, let’s have a look at the default factory settings of an Orbi satellite.
What are the Factory Default Settings of Orbi RBS850?
When you perform a factory default reset of the Orbi satellite, the default Orbi login password along with other settings return to the default values. The following table shows the factory default settings of your Orbi RBS850 satellite:
| Feature | Default Setting |
|---|---|
| Routerlogin URL | orbilogin.com |
| User name | admin |
| Login password | password |
| Internet Connection | |
| WAN MAC address | Default hardware access |
| WAN MTU size | 1500 |
| Port Speed | AutoSensing |
| Local Network (LAN) | |
| LAN IP | 192.168.1.250 |
| Subnet mask | 255.255.255.0 |
| DHCP server | Disabled |
| DMZ | Disabled |
| Time zone adjusted for daylight saving time | Disabled |
| WiFi | |
| WiFi Communication | Enabled |
| SSID name | See satellite label |
| Security | WPA2-PSK (AES) |
| SSID | Enabled |
| Transmission speed | Auto |
What to Do If You Can’t Reset Orbi RBS850 Satellite?
There can be instances when you cannot perform a factory default reset of your Orbi satellite. The points given below will let you know what to do in that case:
- Ensure Proper Power Supply: Without ensuring sufficient power supply, you cannot reset your Orbi RBS850 satellite. Thus, be very sure that you have connected your satellite to a well working power outlet.
- Press the Button for Correct Duration: The Reset button on the Orbi satellite must be pressed very carefully. Do not release the button before 7 seconds. If you do that, the factory reset won’t complete.
- Reboot the Satellite: Chances are that the factory reset process is not getting completed due to some unexpected errors. To get rid of them, we suggest you reboot your Orbi RBS850 satellite and give factory reset a try again. After that, connect Orbi satellite to router once again and set it up.
The Concluding Thought
So, this was everything about what can be done if you can’t factory reset Orbi RBS50 satellite. At first, you got to know how to go about the process. After that, you gained an insight into the factory default settings of your satellite along with the troubleshooting tips to follow if the satellite isn’t resetting. Now, we hope that you will be able to reset the satellite and set it up once again with the help of the Orbi app.